CarPro Descale Shampoo (500ml)

Features & Specifications:

  • Removes minerals from coated and uncoated surfaces.
  • Safe for coated and non-coated cars.
  • Versatile cleaner capable of removing waxes, sealants, and tough dirt.
  • Ceramic coating rejuvenation abilities.
  • pH 6

 4,700.00

Description

Descale was designed from the ground up for reviving ceramic coatings that have had minerals build up on them.

Over time, minerals (sometimes seen as water spots) and sometimes not easily visible will “clog” or cause the surface to be less smooth. This in turn creates heavier surface tension which in turn does not allow water and dirt to shed as easily from the surface. Most communities suffer from this situation (often known as “hard water”). CARPRO Descale car shampoo was created to help remove and strip these stubborn minerals from coated or even non coated cars. It breaks down the built-up minerals that reduce gloss and restores the smoothness of ceramic coatings, while bringing back its hydrophobic nature impaired by mineral stains!

While fantastic for freeing ceramic coatings and strong nano sealants (like CARPRO Hydro2 or CARPRO Hydrofoam) of baked on mineral deposits, Descale is not the correct shampoo for a regular wash of a waxed or sealed car as it may remove the wax or sealant. At Sky’s the Limit Car Care we recommend this product for coated cars subjected to an abundance of mineral deposits, for quarterly maintenance washes, and for neglected vehicles with mineral stains as an initial prep step before decontamination and detailing steps.

Like many CARPRO products, Descale can be used “full circle” at the start of the detailing process or as maintenance for your CQUARTZ coated vehicle. It can remove waxes and “old school” sealants, prepare paint for polishing, or as it was designed to remove traffic film and minerals on coated and non-coated vehicles.

 

Directions:

  1. Dilute 1:100 for bucket washing or 1:10 for foam sprayer/spray bottle.
  2. For light contamination: use Descale as a snow foam and allow for maximum dwell time (without letting it dry) before rinsing. Follow up with a hand wash.
  3. For heavier contamination: wash panel by panel starting with horizontal panels. Wash the panel and allow Descale to dwell for as long as possible without letting it dry.
  4. Repeat if necessary.
  5. Thoroughly rinse with water.

Precautions:

  • Test on an inconspicuous area before use.
  • Do not allow to dry on the surface.
  • Recommended eye and skin protection.
  • Keep out of the reach of children.
  • Store in a dry cool place.